Classification of toughened glass application scope of various toughened glass

Toughened glass has good mechanical properties thermal shock resistance, also known as reinforced glass. There are many kinds of toughened glass, the suitable glass should be selected in different application areas.

There are several types of toughened glass

(1) Ordinary flat glass

1. 3-4 cm glass, mm is also called cm in daily life. 3 cm glass, as the toughened glass manufacturer said, refers to the glass with a thickness of 3 mm. This specification of glass is mainly used for the surface of picture frame

2. 5-6 cm glass, mainly used for light transmission modeling of small areas such as exterior wall windows, door leaves, etc

3. 7-9cm glass, mainly used in large area of indoor screen other forms with frame protection

4. 9 - 10 cm glass can be used for indoor large area partition, rail other decoration projects

5. 11-12 cm glass can be used in floor spring glass doors some movable partitions with large flow of people

6. More than 15 cm glass, generally sold less on the market, often need to order, mainly used for large area of ground spring glass door, external wall, whole glass wall

Application scope of toughened glass

1. Toughened glass. It is a kind of prestressed glass made of ordinary flat glass after reprocessing. Compared with ordinary flat glass, toughened glass has two characteristics:

1) The strength of the former is several times that of the latter, the tensile strength is more than three times that of the latter, the impact resistance is more than five times that of the latter. 2) toughened glass is easy to be broken, even if it is broken, it will be broken in the form of particles without sharp angle, which greatly reduces the harm to human body

2. Sandblasting glass. Its performance is basically similar to that of frosted glass. Different frosted glass is replaced by sandblasting glass. Because they are similar visually, many owners even decoration professionals confuse them

3. Frosted glass. It is also made of common flat glass by re frosting. The thickness is generally less than 9 cm, more than 5 6 cm

4. Wired glass is a kind of flat glass with impact resistance, which is made of metal wire metal mesh embedded in the glass plate by calendering method. When impacted, it will only form radiation cracks hurt people by falling. Therefore, it is mostly used in high-rise buildings workshops with strong concussion

5. Embossed glass. It is a kind of flat glass made by calendering. Its main feature is transparent opaque. It is mostly used in toilet other decoration areas

6. Hollow glass. The two pieces of glass are usually kept apart by gluing. The air in the interval is dry, the surrounding is sealed with sealing materials. It is mainly used in decoration projects with sound insulation requirements

7. Bulletproof glass is actually a kind of laminated glass, but the glass made up of it mostly adopts toughened glass with high strength, the number of laminated glass is relatively large. It is mostly used in decoration projects with high requirements such as banks mansions

8. Laminated glass. Laminated glass is generally composed of two pieces of ordinary flat glass (also can be toughened glass other glass) an organic adhesive layer between the glass. When it is damaged, the fragments still adhere to the adhesive layer, avoiding the injury to human body caused by the splashing of fragments. It is mostly used in the required decoration projects

9. Hot bending glass. Curved glass made of flat glass heated softened in the mold then annealed. In some decoration, the frequency is higher higher. It needs to be ordered there is no spot